Affiliate program Archives

*Cooling Season is here! Some buildings are ready. Are you?*

Cooing Season is here and its annual

“One-Two Punch”: first, storms with hail, then cottonwood season.

It’s really tough on your HVAC equipment.

Rooftop units, condensers, air-cooled chillers & cooling towers get beat up.

It hits your maintenance budget, electric bills and bottom line every day!

Don’t let it “punch your lights out” with high electric bills, compressor failures and premature equipment replacement!

Many companies responsible for building operation and maintenance have taken steps to mitigate these problems.

We can help you, too. With the proven, reliable and patented products manufactured by Air Solution Company.

éPlus Environmental Solutions is the authorized factory representative in Kansas & Missouri.

Call us today, we really can help.

	Check back,more videos will be posted in the future.
Product Overview from AHR 2012		Combo Playlist – 4 Videos

Pulley Mount System with Vinyl Cover

Close-Up Look at the Vinyl Cover

Two-Men Lowering the Pulley-Mount Filter

One-Man Lowering the Pulley-Mount Filter

Weather Guard For Low Ambient Chiller Start-up

(Patent Pending)

Weather Guards mount over the condenser coils on the prevailing wind side of the unit to block air movement through the coil during low ambient operation. Note, low ambient temperatures will offset the reduction of air movement through the coil.

Compressors require a small amount of heat retention to support the startup process – however, during frigid temperatures, it takes as little as a 5 mph breeze through the coil to dissipate the necessary heat required and when this happens, the compressors will stall leaving process equipment and operations starved for cooling.

Wind Guards are constructed of a heavy duty, fiber reinforced vinyl with outer reinforcement. Includes choice of fasteners: – nylon turn stud or toggle fasteners, Heavy duty Stud Adapters or Self-tapping Screws & Bonded Washers.

Wind Guards Must Be Removed When Ambient Temperatures Rise to a Point where Air Movement through the Coil is required for normal operation – Contact Plant For Minimum Equipment Requirements for Using This Product.

Protect Cooling Tower Fill Media and Basin Components from Damaging Ice and Snow Build-up During Winter Shut Down (Patent Pending)

Also ideal for protecting Fill Media during transportation and prior to New Construction Start-up

Weather Guards mount over the intake opening on cooling towers to protect the fill and sump from ice and snow build-up during winter shut down. When produced at the same time as Air Inlet Screens, Weather Guards will mount directly over the top of the Screens using the same fasteners.

Weather Guards are constructed of a heavy duty, fiber reinforced vinyl with outer reinforcement. Includes choice of fasteners: – nylon twist lock or toggle fasteners, heavy duty Stud Adapters or Self-tapping Screws & Bonded Washers.

Scroll Down for Cottonwood Filter Videos

Weather Guard from Air Solution Company